Tough & Built to Last
Long Lasting Power and Icom Quality
65 Watts of RF Output Power with Heavy Duty Endurance
Powerful 4.5W Audio Output Provides Loud and Clear Audio
Tested to the Latest MIL-STD 810 G Specifications
Stable 65W of output power*
The IC-2300H can generate 65W of output power. The rugged aluminum diecast provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission. * Output power differs depending on version and specific regulatory requirements.
A total of 207 memory channels
The IC-2300H has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 6 characters for easy recognition.
Built-in CTCSS and DTCS encoder/decoder
The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The tone scan function detects the subaudible tone that is used for repeater access. The pocket beep function gives you an audible and visual indicator of an incoming call.
The DTCS encoder function (DTCS transmit only) is also available.
The IC-2300H retains the basic panel layout and its user interface from the IC-2200H. A 70.6×20 mm LCD display offers a good viewing angle suitable for mobile operation. The bottom of the display indicates the available functions of the front panel buttons directly below the display.
Multiple scan functions
The IC-2300H supports various scan types for maximum reception and ease of use. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links .
Tested to the MIL-STD 810 G specifications
The IC-2300H is built tough to protect from a rough road. It has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests.
Power supply voltage display
Wide/narrow channel setting
4.5W (typical) loud audio
Reduced depth dimensions
Automatic power off
Selectable LCD backlight color (amber, yellow and green)
Weather channel receive and alert function (USA version only)
Automatic repeater function (USA version only)
Selectable squelch delay from short and long
Squelch attenuator reduces suppression from strong signals
PC to transceiver and transceiver to transceiver cloning capability (optional cloning software, CS-2300H and/or cloning cable required)
* Depending on version
Number of channels
(including 6 scan edges, and 1 call)
Type of emission
F2D, F3E (FM)
Power supply requirement
13.8V DC ±15%
Operating temperature range
–10°C to +60°C; 14°F to +140°F
(projections not included; W×H×D)
1.1 kg; 2.43lb
* Guaranteed range TX/RX: 144–148MHz
Output power* (at 13.8V DC)
65W, 25W, 10W, 5W
Max. frequency deviation
Less than –60dBc
600Ω (8-pin modular)
* Output power differs depending on version and specific regulatory requirements.
Sensitivity at 12dB SINAD
Less than 0.18μV
More than 6kHz (at 6dB)
Less than 14kHz (at 60dB)
More than 3kHz (at 6dB)
Less than 9kHz (at 55dB)
Spurious response rejection
More than 60dB
Audio output power
4.5W typ. (10% dist. 4Ω load)
External speaker connector
2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.